Washing, Waxing and Polishing Your Car
If you wish to maintain your car in a good condition then you will need to know ways to rinse, wax and shine it. Valeting your car frequently will help keep it looking great, but will also preserve the paint and finish from the ravages of time, the weather and the natural environment.
The Tools and Techniques
All of the worn out cloths and sponges you’ve used to wash your car before have to be thrown out. The best choice here is a very soft, wool wash glove. Do not make the blunder of guessing you’ll wash your car with any sort of old thing. Real wool wash mitts retain far more water and shampoo, but they’re also your best option for cleaning the exterior of your car without damaging it.
Along with your new woolen wash mitt, use a two bucket method. One of the buckets will contain clear, clean water and the additional should have the mixture for cleaning. When you are rinsing your wash mitt, use the clean water to make sure that you’re not moving the dirt back on top of the vehicle. This really boosts the performance of both the shampoo and water mixtures.
One more quick hint – ensure you have got a bucket guard. Bucket guards enable dirt to drop through them, but prevents you from picking it up again. Keep in mind, you will find far better results if you are working with a high quality shampoo. After you’ve finished cleaning your car, be sure you’ve got a PVA and / or microfibre towel to dry it well.
Washing and Drying
Park your vehicle in the shade when you begin washing. The very first goal is rinse your car once so that the dirt will become simpler to remove. Start cleaning your car from the top down – begin with the roof, and use straight, overlapping actions here. Rinse each place through when you have washed it. While rinsing, have a slow flow of water – don’t use any high pressure.
Start using two decent towels to dry your vehicle. Carefully stroke the surface of your car with the towel, rather than scrubbing it dry. The towels will carry a lot of the water so you will need to drain them often to allow them to be more helpful. The first of the two towels will take in the majority of the water. When it’s saturated, make use of the second towel to dry up any remaining water droplets on your car.
Polishing and Waxing
Polishing is the next step here. To achieve the greatest results you’ll want to work with nonabrasive polish. You might also need to use a few various types to get the very best finish. Polishing restores your car’s paint to a near perfect shine by eliminating any kind of minor imperfections.
It’s best to use an electrical car polisher for the job, since it helps ensure the ideal use of the polish along with the best results (which may be tough to pull off by yourself). It is crucial to take your time while polishing. Work slowly in 2 by 2 foot areas.
For top level protection, make certain you’re using up and down movements and then side to side to cover the entire zone. Prevent contact with the edge of the electric polisher’s pad because this will cause irregular pressure and possibly harm the finish. The last step is to use a carnauba wax or a very good synthetic. You put on the wax the same way you’ve polished with the same alternative to work with an electrical polisher. Putting on the wax by hand will normally get a greater shine.
If you happen to keep to the whole car valeting process often, you can be certain that your vehicle will always be looking amazing at all times.
Looking to find the best car polishing results, then visit our Car Valeting HQ website and learn how to car valet like a professional.